Smart Shadow remover - for use on stone and masonry

For use on all stone and masonry where shadows are still visible.
 
 Highly active
 Water washable
 contains no chlorinated solvents
 Biodegradable

Usage: Can be used on all types of stone and masonry.
Applications: Apply neat by spray, brush or cloth a generous coating of Smart Shadow remover. Leave to dwell for up to 5 minutes, do not allow product to dry out,  then remove by rinsing off with a pressure washer (Hot/steam is best especially in colder weather)  Repeat if necessary.
Give the area one final rinse with an acid-free neutraliser if necessary. 
 
Safety Precautions:
 
Use in a well-ventilated area. Avoid contact with skin or eyes. Wear chemical-resistant goggles or visor. Wear rubber (not PVC) gloves and overalls. Splashes to the skin should be washed off with plenty of water. In the event of eye contact, irrigate with clean water. For detailed health and safety information request a hazard datasheet. 
 
Contact details: Lynn Gunter 07792 738831
Email: lynn@slsolutionsuk.co.uk
 
 
SMART SHADOW REMOVER IS FOR PROFESSIONAL USE ONLY. NOT TO BE USED FOR ANY OTHER PURPOSE. NOT FOR RESALE. DO NOT MIX WITH ANY OTHER PRODUCT. TRIAL ON A SMALL INCONSPICUOUS AREA PRIOR TO FULL APPLICATION.
 
USE NEAT - DO NOT DILUTE
ONLY POUR THE REQUIRED AMOUNT INTO A POLYPROPYLENE
 
CONTAINER DO NOT POUR ANY UNUSED PRODUCT BACK IN TO CONTAINER AS IT WILL CONTAMINATE THE REST OF THE PRODUCT
EVERY USER OF THIS PRODUCT SHOULD WEAR SAFETY GOGGLES, GLOVES AND CAREFULLY FREAD ALL APPLICATION AND SAFETY INSTRUCTION BEFORE USING 
 
Ingestion: DO NOT induce vomiting, drink 1 - 2 glasses of water, seek              medical attention
 
Skin Contact:  Wash off immediately with plenty of soap and water, remove  contaminated clothing, flush skin with running water. Seek medical attention if irritation or symptoms persist.
 
Eye Contact: Rinse continuously with water for at least 15 minutes, holding the eyelids open. Seek medical attention.  If can be done easily done remove contact lenses.
 
Spills/leaks:     Absorb on inert absorbent and transfer to a container.               Prevent spillage from entering natural waters/land drains. 
 
FIRE:    Use water fog or fine water spray. Emergency workers to wear full protective clothing including breathing apparatus.  
 
Emergency contact S & L Solutions (London) Ltd
 
Lynn:  07792 738831 or Steve: 07957 107467